Temperature Control Unit
Temperature control unit with very high cooling capacity over the entire operation range

Operational use:

with water from 25°C up to 90°C

• Rollers • Plates • Double walled vessels • Other large consumers

TECHNICAL DATA:	There are 4 different models available
Temperature range	25°C up to 90°C with water
Temperature control	self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring.
Flow control	electronically, with digital display and automatic control of the minimum flow.
Heating capacity Switchable in stages Autom. switch off	18 kW 9 / 9 no	27 kW 9 / 9 / 9 yes	36 kW 9 / 9 / 9 / 9 yes	45 kW 9 / 9 / 9 / 18 yes
Cooling capacity	increased cooling capacity by switching to the plate heat exchanger standard heat exchanger: 200 kW at 90° plate heat exchanger: 400 kW at 90°C at cooling water temperature approx. 12°C
Pump capacity Pressure mode Vacuum mode	motor 2,2 kW max. 4,5 bar / max. 200 l/min vacuum max. 8 mH2O
Filling amount	min. 26 litres, max. 40 litres
Connections Medium Cooling water	1" BSP male thread 1" BSP male thread, inlet with water filter 1" BSP female thread
Dimensions (L×W×H)	1'240 × 480 × 1'400 mm, incl. castors
Weight	approx. 180 kg empty
Colour	silvergrey RAL 7001

Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz. The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.