Temperature Control Unit
Powerful pressurised water unit with 18 or 24 kW heating capacity

Operational use:

Model N	with water up to 140°C	pump with axial face seal
Model B/BP	with water up to 160°C	pump with seal less magnetic drive

TECHNICAL DATA:	TT-138 N	TT-138 B/BP
Temperature range	up to 140°C	up to 160°C
Temperature control	Self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring.
Heating capacity Switchable in stages	18 kW      24 kW 6 / 12        6 / 18	18 kW      24 kW 6 / 12        6 / 18
Cooling capacity Indirect Direct	approx. 85 kW at 160°C approx. 60 kW at 60°C
Pump capacity Pressure mode Vacuum mode Model	motor 1,8 kW max. 5 bar / max. 110 l/min. vacuum max. 8 mH2O axial face seal	motor 1,8 kW max. 6,5 bar / max 75 l/min vacuum max. 8 mH2O seal less magnetic drive
Pressure increasing pump	no	yes
Temperature measurement at the mould	yes	yes
Pressure discharge	yes	yes
Leakstopper and mould drain	with compressed-air	with compressed-air
Filling	automatic	automatic
Connections Medium Cooling water Compressed-air	3/4" BSP female thread 1" BSP male thread, inlet with water filter 1" BSP female thread 1/4" BSP female thread
Dimensions (LxWxH)	1'240 × 480 × 1'400 mm, incl. castors
Weight	approx. 180 kg empty
Colour	silvergrey RAL 7001

Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F