Temperature Control Unit
Robust, powerful pressurised water unit with 12 kW heating capacity

Operational use:
Model N    with water up to 140°C    pump with axial face seal

TECHNICAL DATA:
Temperature range	up to 140°C
Temperature control	Self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring.
Heating capacity Switchable in stages	12 kW 6 / 6
Cooling power Indirect	approx. 60 kW at 140°C
Pump capacity Pressure mode Vacuum mode	motor 1,8 kW max. 5 bar / max. 110 l/min. vacuum max. 8 mH2O
Pressure increasing pump	no
Temperature measurement at the mould	no
Pressure discharge and mould drain	yes
Leakstopper	no
Filling	automatic
Connections Medium Cooling water	3/4" BSP female thread 3/8" BSP female thread, inlet with water filter 3/8" female thread
Dimensions (L×W×H)	870 x 360 x 915 incl. castors
Weight	approx. 107 kg empty
Colour	silvergrey RAL 7001

Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F