Temperature Control Unit
Powerful temperature control unit for exigent injection moulders

Operational use:

TT-168 E, TT-168 H	with water with oil	up to 90°C up to 150°C	mould weight mould weight	up to 1'200 kg up to   600 kg
TT-168 E/A, TT-168 H/A	with water	up to 90°C	mould weight	up to 1'800 kg

TECHNICAL DATA:	There are 4 different models available
	TT-168 E	TT-168 H	TT-168 E/A	TT-168 H/A
Temperature range Water Oil	up to 90°C up to 150°C	up to 90°C up to 150°C	up to 90°C 　　　-	up to 90°C 　　　-
Temperature control	self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring.
Heating capacity (water) Switchable in stages	12 kW 3 / 9	12 kW 3 / 9	18 kW 9 / 9	18 kW 9 / 9
Heating capacity (oil) Switchable in stages	6 kW 3 / 3	6 kW 3 / 3	not suitable for oil operation
Cooling capacity	45 kW at 90°C - see diagram
Pump capacity Pressure mode	motor 0,75 kW max. 4,5 bar max. 75 l/min	1,5 kW max. 8,0 bar max. 75 l/min	0,75 kW max. 4,5 bar max. 75 l/min	1,5 kW max. 8,0 bar max. 75 l/min
Vacuum mode	vacuum max. 8 mH2O
Filling amount	min. 16 litres, max. 20 litres
Connections Medium Cooling Water	1/2" BSP female thread 3/8" BSP male thread, inlet with water filter 3/8" BSP female thread
Dimensions (L×W×H)	710 × 325 × 785 mm, incl. castors and handles
Weight	approx. 67 kg empty
Colour	silvergrey RAL 7001

Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz. The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.