Temperature Control Unit
Powerful temperature control unit with very high cooling capacity

Operational use:

TT-168 E/PHE, TT-168 H/PHE	with water	up to 90°C	mould weight	up to 1'200 kg
TT-168 E/A/PHE, TT-168 H/A/ PHE	with water	up to 90°C	mould weight	up to 1'800 kg

TECHNICAL DATA:	There are 4 different models available
	TT-168 E/PHE	TT-168 H/PHE	TT-168 E/A/PHE	TT-168 H/A/PHE
Temperature range	20°C up to 90°C with water
Temperature control	self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring.
Flow control	electronically, with digital display and automatic control of the minimum flow.
Heating capacity Switchable in stages	12 kW 3 / 9	12 kW 3 / 9	18 kW 9 / 9	18 kW 9 / 9
Cooling capacity	increased cooling capacity by switching to the plate heat exchanger standard heat exchanger: 50 kW at 90°C plate heat exchanger: 130 kW at 90°C at cooling water temperature approx. 12°C
Pump capacity Pressure mode	motor 0,75 kW max. 4,5 bar max. 75 l/min	1,5 kW max. 8,0 bar max. 75 l/min	0,75 kW max. 4,5 bar max. 75 l/min	1,5 kW max. 8,0 bar max. 75 l/min
Vacuum mode	vacuum max. 8 mH2O
Filling amount	min. 16 litres, max. 20 litres
Connections Medium Cooling Water	3/4" BSP female thread 1" BSP male thread, inlet with water filter 1" BSP female thread
Dimensions (L×W×H)	980 × 365 × 750 mm, incl. castors
Weight	approx. 90 kg empty
Colour	silvergrey RAL 7001

Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz. The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.