Temperature Control Unit
Powerful, small oil unit for temperatures up to 200°C

Operational use:
moulds up to 600 kg

TECHNICAL DATA:
Temperature range	up to 200°C with heat transfer oil TOOL-THERM SH-3
Temperature control	self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring.
Flow control	electronically, with digital display and automatic control of the minimum flow.
Heating capacity	8 kW
Cooling capacity	approx. 20 kW at 200°C circulating temperature
Pump capacity Pressure mode Vacuum mode	motor 1,8 kW max. 5,5 bar / max. 100 l/min vacuum max. 8 mH2O
Temperature measurement at the mould	yes
Leakstopper and mould drain	yes
Expansion tank capacity	8 litres
Filling amount	8 litres
Expansion volume	6 litres
Connections Oil circuit Cooling water	3/4" BSP female thread inlet:   water filter 1/2" BSP female thread outlet: 1/2" BSP female thread
Dimensions (L×W×H)	880 × 360 × 920 mm, incl. castors
Weight	approx. 120 kg empty
Colour	silvergrey RAL 7001

Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.