TECHNICAL DATA: | ||||
Temperature range | up to 300°C with heat transfer oil TOOL-THERM SH-3 | |||
Temperature control | self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring. |
|||
Flow control | electronically, with digital display and automatic control of the minimum flow. | |||
Heating capacity Switchable in stages |
48 kW 8 / 8 / 8 / 8 / 8 / 8 automatic shut down of the heating capacity which is not required. version with 24 kW heating capacity also possible. |
|||
Cooling capacity | max. 480 kW - see diagram | |||
Cooling water consumption | 110 l/min (minimum 40 l/min, but leads to strong reduction of cooling capacity) | |||
Pump capacity Pressure mode |
motor 4 kW max. 4 bar / max. 260 l/min |
|||
Expansion tank capacity | 96 litres | |||
Filling Amount | 75 litres | |||
Expansion volume | 75 litres | |||
Connections Oil circuit Cooling water |
Flange connection DN 32 flange-outside Ø 140 mm, with 4 holes Ø 18 mm on a screw hole circle of 100 mm recommended ceiling: 80 x 42 x 2 mm 1 1/2" BSP female thread (required water pressure 1.5 - 4 bar) |
|||
Dimensions (L×W×H) | 1'710 × 790 × 1'540 mm | |||
Weight | approx. 520 kg empty | |||
Colour | silvergrey RAL 7001 |