Heating & Cooling Unit
Temperature range 80°C up to 300°C
Heating capacity 72 kW / 120 kW / 144 kW

Operational use:
rollers, plates, double walled vessels and other heavy duty use

TECHNICAL DATA:	There are 3 different models available
Temperature range	up to 300°C with heat transfer oil TOOL-THERM SH-3
Temperature control	self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring.
Flow control	electronically, with digital display and automatic control of the minimum flow.
Heating capacity Switchable in stages	72 kW 16 / 16 / 16 / 8 / 8 / 8	120 kW on request	144 kW 32 / 32 / 32 / 16 / 16 / 16
Cooling capacity	approx. 600 kW - see diagram cooling capacity
Pump capacity Pressure mode	motor 7,5 kW max. 4 bar / approx. 200 - 500 l/min - see diagram pump capacity
Expansion tank capacity	130 litres	130 litres	130 litres
Filling Amount	100 litres	200 litres	200 litres
Expansion volume	100 litres	100 litres	100 litres
Frequency inverter for regulation of pressure	yes	yes	yes
Connections Oil circuit Cooling water	Flange connection DN 50 flange-outside Ø 165 mm, with 4 holes Ø 18 mm on a screw hole circle of 125 mm recommended sealing: 100 x 60 x 2 mm 1 1/2" BSP female thread (required water pressure 1.5 - 4 bar)
Dimensions (L×W×H)	2'150 × 1'300 × 1'950 mm
Weight (empty)	approx. 1'100 kg	approx. 1'270 kg	approx. 1'270 kg
Colour	silvergrey RAL 7001

Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F.