Temperature Control Unit
Compact, powerful pressurised water unit for injection moulds

Operational use:
with water up to 160°C

TECHNICAL DATA:	TT-DW1609kW	TT-DW16018kW
Temperature range	up to 160°C	up to 160°C
Temperature control	Self-optimizing, electronic microprocessor controller MP-888 with digital display of the set and actual value. Automatic temperature monitoring.
Flow control	electronically, with digital display and automatic monitoring of the minimal flow.
Heating capacity	9 kW	18 kW
Cooling capacity	approx. 40 kW at 150°C
Pump capacity Pressure mode	motor 1,1 kW max. 5 bar / max. 36 l/min.
Refill pump	yes	yes
Temperature measurement at the mould	no	no
Pressure discharge and mould drain	yes	yes
Leakstopper	no	no
Filling	automatic	automatic
Connections Medium Cooling water	1/2" BSP female thread inlet      with water filter              1/2" BSP female thread outlet    with non-return valve    1/2" BSP female thread
Dimensions (LxWxH)	750 × 180 × 550 mm, incl. castors	750 × 285 × 550 mm, incl. castors
Weight	approx. 55 kg empty	approx. 67 kg empty
Colour	silvergrey RAL 7001, front RAL 7016

Options:
MP-988 Microprocessor Controller for Digital Interfaces (RS-485 / RS-232 / Current Loop 20mA / CAN-bus / Profibus)

All possible voltages are available from 3 x 200 V to 3 x 600 V and 50/60 Hz.
The units are available conform to UL/CSA specifications. For the USA market the units are equipped with NPT-thread connections and the controller is adjusted to indicate °F